Shenzhen Huaxing New Energy Technology Co.,Ltd joan.deng@huaxingenergy.com 86--0755-89458220
Product Details
Place of Origin: China
Brand Name: HUAXING
Certification: MSDS
Model Number: HX4850T
Payment & Shipping Terms
Minimum Order Quantity: 5
Price: Negotiation
Packaging Details: Wood case packge
Delivery Time: 25day
Payment Terms: T/T
Supply Ability: 50 pks per day
Nominal Voltage: |
51.2V |
Nominal Capacity: |
50Ah |
Battery Combination: |
16S9P |
Nominal Energy Capacity: |
2560WH |
Max. Charge Current: |
50A |
Charge Time: |
2-5 Hours |
Max. Continuous Discharge Current: |
50A |
Peak Discharge Current: |
60A |
Total Weight: |
28KG |
Dimensions(L*W*H): |
482.6*420.0*132mm |
Parallels NO.: |
Maximum 15 Pks |
Application: |
Telecom,Solar System |
Nominal Voltage: |
51.2V |
Nominal Capacity: |
50Ah |
Battery Combination: |
16S9P |
Nominal Energy Capacity: |
2560WH |
Max. Charge Current: |
50A |
Charge Time: |
2-5 Hours |
Max. Continuous Discharge Current: |
50A |
Peak Discharge Current: |
60A |
Total Weight: |
28KG |
Dimensions(L*W*H): |
482.6*420.0*132mm |
Parallels NO.: |
Maximum 15 Pks |
Application: |
Telecom,Solar System |
Wholesale 48V50AH Lithium LiFePo4 Battery Communication BMS And Display For Telecom Tower
48V 50Ah 2.5KWh LiFePo4 Battery Specification
No.
|
Item
|
General Parameter
|
1
|
Model
|
HX4850T
|
2
|
Standard Capacity
|
50AH
|
3 |
Rated Voltage
|
51.2V
|
4
|
Max Charge Voltage
|
58.4V
|
5
|
Discharge Cut Off Voltage
|
40V
|
6
|
Standard Charge Current
|
50A
|
7
|
Max Continuous Discharge Current
|
50A
|
8
|
Peak Instant Discharge Current
|
60A
|
9
|
Dimension(ABS)
|
482.6*455*132mm
|
10
|
Total weight(Approx.)
|
28kg
|
11 |
Operate Temperature
|
-20°C~60°C
|
12
|
Built-in BMS
|
YES
|
13 |
Cycle Times
|
2000 cycles
|
BMS Basic specification:
Item | Content | Criterion |
Charge and Discharge Port | Shared | |
Communication | RS232/RS485 | |
Parallel Connection | 15PCS | |
Serial Connection | Not allowed | |
Normal Current | Charge Current | ≤50A |
Discharge Current | ≤50A | |
Over charge Protection | Over charge detection voltage | 3.75±0.05V |
Over charge detection delay time | ~1000mS | |
Over charge release voltage | 3.55±0.05V | |
Over charge release condition | Cut off charger | |
Maximum charge voltage | 3.65±0.05V | |
Over discharge protection | Over discharge detection voltage | 2.20V±0.10V |
Over discharge detection delay time | 200ms | |
Over discharge release voltage | 2.4V±0.10V | |
Discharge over current protection | Discharge over current detection current | 100A |
Discharge over current detection delay time | ~100±50ms | |
Discharge over current release condition | Cut load | |
Short circuit protection | YES |
Inner Cell performances:
Production line:
3GWH production line Mass production
Cell production line
The comparison between LFP and SLA
LFP battery | SLA battery | Remarks | |
Weight | high energy density: 110-120Wh/kg, leads to a smaller size and lighter weight | low energy density: 32-37Wh/kg | LFP battery is about 70% size and weight of SLA battery, lower the total weight of application |
Cycle life | 4000 cycles and more | 400-500 cycles | LFP can be used for almost 10 years; SLA can only last for max. 2 years |
Capacity Utilisation | 80 to 100% | 50 to 60% | Most lead acid batteries do not recommend more than 50% depth of discharge |
Efficiency | allows for the same amp hours both in and out | voltage drops quickly and reduces the batteries' capacity while charging and rapid discharging | LFP battery has almost 100% efficiency while SLA battery has only maximum 75% efficiency |
Voltage | maintain voltage throughout the entire discharge cycle | drops consistently throughout the discharge cycle. | A stable droping voltage allows for greater and longer-lasting efficiency of electrical components |
Cost | Up to 8 times the cycle life compared to equivalent SLA | A low upfront cost, but a high cost of ownership in long run | Lower total cost of ownership |
Environmental effect | clean technology, safer and more environment friendly | contains the heavy metal - lead |